본문 바로가기 주메뉴 바로가기

열물성 분석 제품

열전평가장치

home > 제품소개 > 열전평가장치 > 열전평가장치
재료 단독으로 성능 지수를 도모하기 위하여 필요한 제벡계수•전기 저항•열전도율의 평가 및 모듈화 할 때의 발전 효율•회수 전력을 측정할 수 있습니다.

단소자용 열전변환효율평가장치 Mini-PEM

단소자 및 한 쌍 모듈 등의 열전변환 효율을 측정합니다.
이 장치는 열전 모듈의 발전량뿐만 아니라 변환 효율을 평가할 수 있는 장치입니다.
변환 효율은 4단자법에 의한 측정에 의해 발전량의 전류 의존성과 열류계로 측정한 열류량으로부터 평가합니다.
고온부는 500℃ (표준사양)까지 올릴 수 있으며, 저온부는 액체를 흘려 냉각합니다.​

■ Thermoelectric Conversion Efficiency Evaluation System for Small Modules Mini-PEM

 

Measure thermoelectric conversion efficiency for thermoelectric material alone and a pair of thermoelectric material.

This system can evaluate not only power generation but also conversion efficiency of thermoelectric modules.

The conversion efficiency is evaluated from current dependency of power generation measured with four-probe method and heat flow measured with heat flow meter.
High temperature part can reach up to 500 ℃(standard specifications), while low temperature part is cooled with water flow.

 

■ 용도

  • 작은 모듈의 발전량 및 열유량의 평가
  • 발전량과 열유량으로부터 산출하여 모듈의 변환 효율 평가
  • 단소자에서의 발전량 및 열유량의 평가
  • 열전 모듈의 성능평가 및 수명평가
  • Evaluation of maximum power generation amount and heat flow.
  • Evaluation of module conversion efficiency calculated from maximum power generation and heat flow.
  • Evaluation of power generation amount and heat flow with thermoelectric material alone.
  • Performance and lifetime evaluation of thermoelectric module.

 

■ 특징

  • 열유량, 발전량 데이터를 측정하여 변환효율 측정 가능
  • 사각 2 ~ 10 mm× 높이 1 ~ 20 mm의 작은 모듈의 출력 특성 평가
  • 고온 측은 500 ℃까지 승온 가능
  • 제어 소프트웨어에 의한 간편한 조작
  • Capable of measuring data of heat flow and power generation and then measuring conversion efficiency.
  • Capable of evaluating the output characteristics of small module with 2 to 10 mm (square) x 1 to 20 mm (height).
  • High temperature part can reach up to 500 ℃.
  • Simple operation with control software


■ 사양

모델

 Mini-PEM

측정 물성

 변환효율, 발전량, 열류량

고온부 설정온도

 50 ~ 500

시료 치수

 사각 2 ~ 10 mm × 높이 1 ~ 20 * mm * Max.

측정 분위기

 진공